top of page
Claim Your Free

Pre-Recording + Audio Emergency

Checklists

Avoid the most common issues that make audio sound unprofessional. Five quick checks, one printable PDF, straight to your inbox.

We'll send you the checklist plus occasional audio tips.

No spam, unsubscribe anytime. See our Privacy Policy.

Checklist-Papers.webp

How to Export an AAF from Premiere Pro for Your Sound Mix

Writer: Johannes Riedl
Johannes Riedl
Nov 8
4 min read

Your cut is locked in Premiere, and your mixer is asking for an AAF. The export itself takes a minute. The settings decide whether your mixer can start right away or has to send the file back.


The short answer: To export an AAF from Premiere Pro for your sound mix, duplicate your locked sequence, clean it up, and go to File > Export > AAF. Leave Mixdown Video off, turn on Breakout to Mono, don't render audio effects, choose 48 kHz, 24-bit Broadcast Wave, and add handles. Then export a separate reference video with burned-in timecode from the same sequence.


A quick note on the name: with version 26 in early 2026, Adobe dropped the "Pro," so your app may simply be called Adobe Premiere. The AAF export works the same way.



Before You Export: Prepare a Copy of Your Sequence


Never export from your working sequence. Duplicate it, and clean up the copy. That way your edit stays untouched, and the AAF contains only what belongs in the mix.


  • Sort your tracks. Dialogue, sound effects, and music each on their own tracks, in the same order throughout the film.

  • Delete what doesn't belong. Remove muted, disabled, and unused clips. If something is optional, label it clearly.

  • Unmerge merged clips. According to Adobe, merged clips are not supported in AAF export.

  • Flatten multicam clips and unnest nested sequences. Otherwise your mixer may receive mixed-down audio instead of editable clips.

  • Keep names simple. Avoid special characters, accents, and symbols in clip and sequence names. They can break the export or the import on the other side.


If your mixer asks for an audio-only AAF, unlink audio from video in the copy and delete the video tracks. Ask first, because some mixers prefer to see the video clips in the timeline.



Step by Step: The AAF Export Settings


  1. Open the export. Select your prepared sequence and choose File > Export > AAF.

  2. Mixdown Video: off. This option renders your video into the AAF package. A separate reference video is cleaner and easier to replace if the cut changes.

  3. Breakout to Mono: on. Premiere renders new mono files and splits stereo clips into separate left and right tracks. Audio software handles this best.

  4. Render Audio Clip Effects: off. Your mixer needs the raw sound. If you want them to hear what you did in the edit, turn it on together with "Include Clip Copies Without Effects." Then both versions are in the AAF.

  5. Sample Rate and Bits per Sample: 48000 Hz and 24 bit. This is the usual standard for film and video.

  6. Files: Embed Audio or Separate Audio. Embed Audio creates one self-contained file, which is the simplest option for short films. On Windows, Adobe documents that embedded AAFs larger than 2 GB fail to export. For longer films, choose Separate Audio, which also keeps more metadata.

  7. Format: Broadcast Wave. It carries metadata such as timecode, which your mixer's software can use.

  8. Render: Trim Audio Files, with handles. Handles are extra audio before and after each clip, so your mixer can extend sounds and smooth cuts. Premiere asks for them in frames: at 24 frames per second, 24 frames equal one second. Ask your mixer how long they want them.

  9. Export. Click OK, choose a location, name the file, and save.



Exporting an AAF ensures the mixer can access all the audio from your timeline


How Do You Export the Reference Video?


Your mixer works with a reference video, so it has to match the AAF exactly. Export it from the same sequence copy, with the video tracks still in place.


  • Same cut, same frame rate. Never export the reference from a different version of the edit.

  • Burned-in timecode. Premiere's export settings include a timecode overlay. Turn it on so your mixer can check sync at any point.

  • A codec that plays smoothly. We prefer DNxHD 35. Ask your mixer what works best for them.

  • Your rough mix as the audio track. It shows your mixer what you heard in the edit.



Check the Export Before You Send It


A two-minute check saves days of back and forth:


  • Does the file size look plausible? An AAF of a 15-minute film with embedded audio should not be a few kilobytes. It's usually multiple hundred megabytes.

  • If you exported with Separate Audio, is the audio folder next to the AAF? Send both.

  • Pack the AAF, the audio folder, and the reference video into one ZIP file before you upload, so nothing gets separated.

  • Send the original production sound files too. Your timeline rarely contains every microphone.



Frequently Asked Questions


Should I turn on Mixdown Video?

In most cases, no. A separate reference video is easier to handle and to replace if the cut changes. Turn it on only if your mixer explicitly asks for video inside the AAF package.


Embed Audio or Separate Audio: which one is better?

Embed Audio is simpler because everything sits in one file. Separate Audio keeps more metadata and avoids the 2 GB limit for embedded AAFs on Windows. For short films, embedding usually works. For longer films, separate audio is the safer choice.


How long should my handles be?

There is no single standard, so ask your mixer. Longer handles give more room for crossfades and fixes, but they make the files larger.


Should I render my audio effects into the AAF?

Not as the only version. Effects baked into the audio can't be removed later. If you want to show your mixer what you did, include both versions with "Include Clip Copies Without Effects."



A Clean AAF Is the Fastest Start to Your Mix


The AAF export is a small step with a big effect. A clean sequence, the right settings, and a matching reference video mean your mixer can start on your film instead of on your files.




About the author


Johannes Riedl

John has worked in the film industry since 2019. He started out as a film composer with his own studio, JRM-Studios, where his scores have received 11 nominations and awards.


Over time, his work grew from the music to the entire sound of a film.



Today he supervises and mixes independent productions from picture lock to final delivery, and in 2026 alone, he and his team completed post-production on six films. Alongside his work in films, he also produces music for TV through various A-List Production Music Labels such as Atomica Music, AudioAttack, or RipCue Music.



 
 
 

Comments


bottom of page