How to Prepare Your Film for Sound Mixing: A Turnover Checklist

Your edit is locked, so one of the next steps is sound. But what exactly does your mixer need from you? A clean handoff decides how much of the mixing time goes into your film, and how much goes into chasing missing files.
The short answer: To prepare your film for sound mixing, send your mixer an AAF of the locked timeline with embedded audio and handles, a reference video with burned-in timecode, and relevant short notes on what the film needs. Lock the picture before you send anything, and ask your mixer for their exact specs, because every studio works slightly differently. BrightVox Studios for example prefers to receive the reference video as QuickTime - DnxHD 35 Codec.
What Is a Turnover in Sound Post?
A turnover is the handoff from picture editing to sound post-production. The editor exports the locked timeline and everything that belongs to it, and the sound team takes over from there: dialogue editing, sound design, music balance, and the final mix.
The word sounds technical, but the idea is simple. The re-recording mixer rebuilds your film's sound from the material you send. Anything missing from that material has to be found, re-exported, or worked around later. That costs time. And in post-production, time is budget. That's why the proper handover is a key element to a successful post-production.
So, When Is Your Film Ready for Sound Post?
Your film is ready when the picture is locked. Picture lock means the cut is final: no more trims, no new shots, no reordered scenes.
This matters more than it seems. Sound is edited to the frame. If a scene changes after the turnover, every dialogue edit, effect, and music cue in that scene has to be moved to match the new cut. This process is called conforming, and it is slow and error-prone.
Small changes after lock happen on almost every independent film, and they are manageable. Tell your mixer early, and send an updated AAF with a short list of what changed. What gets expensive is a film that keeps changing while the mix is already underway.
When working with us, we mostly prefer a new timesheet with the old timecode and the new timecode for spaces that were adjusted instead of a new AAF file. That allows us to adjust our timelines accordingly.

What Should You Send to Your Sound Mixer?
Here is the checklist we recommend for most independent films. Your mixer may ask for more or less, but this covers the essentials.
An AAF of the locked timeline. AAF (Advanced Authoring Format) is a file that carries your audio tracks, clip positions, fades, and levels into the mixer's software. Export it with embedded audio and with handles. Handles are a few extra seconds of audio before and after each clip, so the mixer can extend a sound or smooth a cut. Ask your mixer how long they want them. If in doubt, longer is safer.
A reference video. This is the picture your mixer works with. It should come from the same locked cut as the AAF, run at the same frame rate, and show burned-in timecode that matches the timeline. Choose a codec that plays smoothly in an editing system. We prefer DNxHD, but ask your mixer what works best for them.
The original production sound files. Your timeline often contains only a mixed track or a single microphone. The recorder's original files usually hold every microphone separately, such as the boom and each lavalier. When a line is noisy on one mic, another mic can often save it. Without these files, that option is gone.
Your music files. Send licensed tracks and score as separate, full-quality files, not only as part of the timeline. Mark any temp music that will be replaced. If you already have cue information or license terms, add them.
Notes for the mix. A short document is enough: scenes you are unhappy with, sounds you have in mind, reference films, and lines that may need ADR. ADR (automated dialogue replacement) means re-recording dialogue in a studio when the original take can't be saved.
Your delivery requirements. Tell your mixer where the film is going: festivals, streaming, broadcast, or online. Each destination comes with its own technical requirements for loudness and formats, and these change over time. It is far easier to mix for them from the start than to adjust afterward.
How Should You Prepare the Timeline Before Exporting?
A tidy timeline makes the export cleaner and the handoff faster. Before you export, go through these points:
Sort your tracks. Keep dialogue, sound effects, and music on separate tracks, and keep that order throughout the film.
Remove what you don't need. Delete muted, disabled, or unused clips, or label them clearly so nobody has to guess whether they belong in the mix.
Flatten complex structures. Nested sequences, compound clips, and multicam edits can export in unexpected ways. Check how your editing software handles them, or flatten them first.
Leave the audio unprocessed. Remove noise reduction, EQ, or other audio effects you added during editing, or tell your mixer what you used. The mixer needs the raw sound to do their work properly.
Check your settings. Make sure the timeline's frame rate matches the reference video, and that your audio runs at 48 kHz, the usual standard for film and video.
The exact steps depend on your editing software. We cover them in detail for Premiere Pro and DaVinci Resolve.
What Are the Most Common Turnover Mistakes?
Most problems we see are not dramatic. They are small gaps that stop work for a day:
The AAF links to media instead of embedding it, so the audio files are missing on the mixer's side.
The export has no handles, so cuts can't be smoothed.
The reference video comes from a different version of the cut than the AAF.
The production sound files are missing, and with them the alternative microphones.
The frame rate of the reference video doesn't match the timeline.
None of these mistakes are a sign of a bad editor. Turnovers are simply easy to get slightly wrong, especially on productions without a dedicated post team.
Not Sure Your Turnover Is Complete?
If you consider working with us, we a Free Turnover Check. Send us your AAF and reference video, and we check whether everything we might need is there before the mix starts. If something is missing, we tell you what it is and how to fix it.
Frequently Asked Questions
Can I send an OMF instead of an AAF?
Many mixers still accept OMF, but it is an older format with more limitations, for example on file size. If your software can export AAF, use AAF. If not, always ask your mixer before you send an OMF.
Can I just send a stereo mixdown of my edit?
A stereo mixdown has all sounds baked together, so dialogue, effects, and music can no longer be balanced separately. It is useful as a reference for what you liked in your edit, but it can't replace the AAF.
Should I clean up the dialogue before I send it?
No. Send the audio as it was recorded. Noise reduction applied during editing often can't be undone, and it limits what your mixer can do later. If you liked a certain effect in your edit, describe it in your notes instead.
Do I need the production sound files if I already have an AAF?
In most cases, yes. The AAF contains the audio as it sits in your timeline, which is often only one microphone or a mixed track. The original recordings let your mixer switch to a cleaner microphone when a line is noisy.
What if my picture changes after the turnover?
Tell your mixer as early as possible and send an updated AAF and reference video with a short list of changes. Small changes are normal. Frequent changes during the mix take extra time, so it is worth locking the picture properly first.
The Mix Starts with the Handoff
A good turnover doesn't make your film sound better on its own. It gives your mixer the time to make it sound better. Lock your picture, export the AAF with embedded audio and handles, add the reference video, the production sound, and your notes, and ask about specs before you export. Every hour your mixer doesn't spend searching for files goes back into your film.
Working on a film right now? We mix independent films with a focus on natural-sounding dialogue, even under difficult conditions.
About the author

John has worked in the film industry since 2019. He started out as a film composer with his own studio, JRM-Studios, where his scores have received 11 nominations and awards.
Over time, his work grew from the music to the entire sound of a film.
Today he supervises and mixes independent productions from picture lock to final delivery, and in 2026 alone, he and his team completed post-production on six films. Alongside his work in films, he also produces music for TV through various A-List Production Music Labels such as Atomica Music, AudioAttack, or RipCue Music.



Comments